XTRA
Hose systems for 2in1 pipeline rehabilitation
SOLTA®LINER XTRA is the unique patented hose system for the rehabilitation of pipe lines with expanded use.
Installation of this system creates two separate, mutually independent pipelines permitting utilization as needed – a new and cost-effective way to improve and modernize an existing infrastructure.
- unique pipe system for the rehabilitation of pipe lines
- one single installation creates two separate, mutually independent pipelines to be used as needed
- different diameter / wall-thickness combinations in adaptation to the intended purpose
- utilization of the second pipe channel for waste-water discharge or as a dry conduit for telecommunications lines, feeder lines or cables
- suitable for use with different types of coatings and resin treatments
- GEBR. RÖDERS AG patent No. EP 1390658
Specifications
| diameters | from DN 150 to DN 1200 |
| wall thickness | in stepped increments from 4 mm to 30 mm |
| coating | upon request |
| process | PULL IN |
| curing method | hot water or steam |
| products which deviate from the standard are available upon request | |
Switzerland
Project sample XTRA liner
As part of a pipeline rehabilitation under a swimming pool, at a public swimming pool in Switzerland, what is known as the SOLTA®LINER XTRA System (2in1 liner) of GEBR. RÖDERS AG was installed.
Task
The goal was to separate a line for the surface / fresh water (known as clean water) and the wastewater from the swimming pool operation by rehabilitating a 40.5 m long, slightly damaged 400 mm concrete pipeline.
Solution
During planning, a decision was made on renovation for a 150 mm XTRA segment in the liner in addition to the 400 mm main pipe. Here it will serve as a waste water line in the pipe section in the crown. The advantage of the 2in1 system, providing two completely separate pipeline areas in only one step, could clearly be implemented here.










